Author: eliteflange

What is the cause of flange leakage? 1. Reason for flange leakage: wrong mouth The staggered seam means that the pipe and the flange are vertical, but the two flanges are not concentric, and flanges are not concentric, so the surrounding bolts cannot freely penetrate the bolt holes. There is no other way, only reaming […]

Flat welding flanges refer to flanges that are connected to vessels or pipes by fillet welding. It can be any flange. Check the integral flange or loose flange respectively according to the degree of integrity of the flange ring and straight cylinder section at the time of design. The ring of the flat welding flange […]

1. Sealing method: The core of the high-pressure self-tightening flange is a precise, new metal-to-metal seal, that is, the seal is formed by the elastic deformation of the sealing lip (T-arm) of the sealing ring, which is a hard seal; The combination of tendons and bones of the ferrule, the ferrule, and the sealing ring […]

Butt welding flange refers to a flange with a neck and a round pipe transition and connected to the pipe by butt welding, which is a kind of pipe fittings. The advantages of butt welding flanges are anti-corrosion, acid and alkali resistance, long service life, etc., and the price is reasonable, the surface is smooth, […]

customization process of flange Raw material inspection Warehousing blanking The forging Forgings The NC machining Machining center processing CNC punching Laser code Ultrasonic cleaning Spectrum detection The finished product packing   threaded flange anchor flange api 6a flange compact flange tubesheet orifice flange blind flange weld neck flange lap joint flange long weld neck flange […]

ASTM A105: American Society for Testing and Material Carbon Steel Forgings for Piping Applications Chemical Requirements Element Composition, % Carbon 0.35 max Manganese 0.60–1.05 Phosphorus 0.035 max Sulfur 0.040 max Silicon 0.10–0.35 Copper 0.40 max Nickel 0.40 max Chromium 0.30 max Molybdenum 0.12 max Vanadium 0.05 max Columbium 0.02 max Mechanical Properties Tensile strength, min, psi [MPa]  70 000 [485] Yield strength, min, psi [MPa]  36 000 [250] Elongation in 2 in. or 50 mm, min,  30 %: Basic minimum elongation for walls 5?16 in. [7.9mm] and over in thickness,  strip tests. When standard round 2-in. or 50-mm gage length or smaller proportionally sized specimen with the gage length equal to 4D is used 22 For strip tests, a deduction for each 1?32 -in. [0.8-mm] decrease in wall thickness below 5?16 in. [7.9 mm] […]

Weld neck flange are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for flanges, the standard height is 1/16″ for weld neck flanges fewer than 400#. For weld neck flanges of 400# and up, the standard flange raised face height is 1/4″. DESCRIPTION OF WELD NECK […]

stainless steel brands In order to solve the cumbersome and difficult-to-remember stainless steel grades, improve the practicability of the brand representation, and contrast with the international standard grades, China has formulated the “Universal Code System for Steel and Alloy Grades”, such as 06Cr19Ni10, corresponding to 304. Different grades of stainless steel have different ingredients, but […]

Cast and Forged Flanges For casting flanges, the shape and size of the blank are accurate, the processing volume is small, and the cost is low, but there are casting defects (porosity, cracks, inclusions); the internal organization of the casting is less streamlined (if it is a cutting part, the streamlined shape is even worse); […]