Pay attention to the stainless steel flange connection. Flange manufacturers generally use bolts on the two planes to connect and close the connecting parts at the same time, such as the connection of ventilation pipes. Such parts can be called “flange parts”. When the water pump and valve are connected to the pipeline, some parts […]
Author: eliteflange
What are the basic process steps of American standard flange-free forging
The American standard or flange is the part that connects the pipe to the pipe to each other and is attached to the pipe end. There are holes in the American standard flange, the bolts make the two flanges tightly connected, and the flanges are sealed with gaskets. American standard flanges can be cast or […]
Which is better between a fully welded ball valve and a flanged ball valve
There are flange links and welded links, but some users will say which one is better. The technician will answer for you: One: The flanged ball valve is more troublesome to process than the fully welded ball valve, and the material is also more and heavier than the welded one. The use cost is slightly […]
Technical requirements for butt welding flanges
In the actual production and development of butt welding flanges, different methods and processes are used for production and production. According to the process methods and principles, it has important value and effect on different aspects, and certain elements are added in actual production. Increase the characteristics and value of carbon steel flanges, and express […]
Flat welding flange-related information
Loose flange: loose flange is commonly known as loose flange, welding ring loose flange, flanging loose flange and butt welding loose flange. It is often used in medium (determinant material) temperature and pressure It is not high and the medium is highly corrosive. Today we talk about the types of forged flange sealing surfaces. There […]
There are two main processes for chemically treating the flange surface
There are two main processes for chemically treating the flange surface There are two main processes for chemically treating the surface of flanges: one is high-temperature oxidation, which is often referred to as flanges; the other is blackening at room temperature. With the advent of the era of industrialization, the petrochemical industry, power industry, metal […]
The principle of use of carbon steel flange
Carbon steel flanges are different from flanges that are not produced according to standard sizes, also known as second-standard flanges. Usually, some unscrupulous merchants will reduce the thickness of the flange and the outer diameter to achieve the purpose of saving materials. Steel or leftover steel is used to process flanges. Usually, this kind of […]
Carbon steel neck flat welding flange
Carbon steel neck flat welding flange Executive standard: national standard, American standard, chemical standard Specification size: DN15-DN600 Pressure rating: PN6~PN40 Connection form: single-sided welding, double-sided nut connection Brief introduction of carbon steel neck flat welding flange The carbon steel neck flat welding flange is also a carbon steel neck flat welding flange. The full name […]
Flange connection structure and flange sealing
The flange is an important part of connecting pipes and pipes. It is connected to the pipe end. There are holes in the flange. The two flanges are tightly connected with wear-resistant bolts, and the flanges are sealed with gaskets. There are two connection methods between container parts: non-detachable (welding) and detachable. Due to the […]
Threaded flange forging die according to the implementation of motion
Large thread flange forging dies according to the embodiment of movement can be divided into orbital forging, swing swage forging, roll forging, cross wedge rolling, ring rolling, roll cross rolling and so on. It is fired at high temperature, compact, except for the abrasive deburring process on the inner wall of the tube after which […]